Table of Contents
Advertisement
Programming
Fig. 188: Adjusting the end label size
3. To adjust the width of the end label, enter the desired value in mm into
4. To adjust the height of the end label, enter the desired value in mm
5. To adjust the spacing between two end labels in the end label printer,
6. To specify which end label is supposed to be cut after being printed
Information
If you do not wish to have the end label cut by the end label printer, but
want to, for instance, tear off the label manually, you must not set the
checkmark at Option Cutter. The included end label printer does not
come with a cutting device.
7. To set the resolution of the end label printer, enter the corresponding
8. Press OK to save.
Operating Instructions 550-D800 - 01.0 - 05/2023
the Width input field.
into the Height input field.
enter the desired value in mm into the Distance input field.
by the end label printer, set the checkmark at Option Cutter.
DPI number in the Printer Resolution DPI input field.
193
Advertisement
Table of Contents
