Table of Contents
Advertisement
The machine is equipped with a central oil-wick lubrication system.
The bearings are supplied from the oil reservoir.
For topping off the oil reservoir, use only lubricating oil DA 10 or oil of
equivalent quality with the following specifications:
• Viscosity at 40 °C: 10 mm²/s
• Flash point: 150 °C
You can order the lubricating oil from our sales offices using the following
part numbers:
Container
250 ml
1 l
2 l
5 l
6.2.1 Lubricating the machine head
Fig. 213: Lubricating the machine head
(1) - Refill opening
(2) - Maximum level marking
214
CAUTION
Risk of environmental damage from oil!
Oil is a pollutant and must not enter the sewage
system or the soil.
Carefully collect up used oil.
Dispose of used oil and oily machine parts in
accordance with national regulations.
Part no.
9047 000011
9047 000012
9047 000013
9047 000014
(3) - Minimum level marking
Operating Instructions 550-D800 - 01.0 - 05/2023
Maintenance
①
②
③
Advertisement
Table of Contents
