Table of Contents
Advertisement
Programming
You can use this program interface to
5. Check and, if necessary, adjust the preset size of the new end label
6. Open the Toolbox and place it next to the end label ( p. 194).
Fig. 186: Preparing the end label (example) (2)
7. Create and insert the end label barcode ( p. 197).
8. If necessary, create and insert another barcode ( p. 199).
Important
If adding an additional barcode, you must not define this barcode as an
end label as well. Otherwise, the system will display an error message
when you try to save the second end label barcode.
An error message will also appear if NO barcode on the end label was
defined as the end label barcode.
9. Create and insert standard text ( p. 200).
10. Create and insert variable text ( p. 201).
11. Insert a graphic; e.g. the company logo ( p. 202).
12. Save the new label script file ( p. 203).
Operating Instructions 550-D800 - 01.0 - 05/2023
• create a new end label
• open and edit/copy the label script file of an existing end label
( p. 192).
191
Advertisement
Table of Contents
