Editing A Seam Record Set (Edit Seam Parameter Record) - Dürkopp Adler 550-D800 Operating Instructions Manual

Programming
Fig. 99: Creating a new seam record set (4)
The new seam record set has been created with preset values and can
now be adapted.

5.4.3 Editing a seam record set (Edit seam parameter record)

The following settings can be edited on the Seam record set display:
Input field
Free/SAB
max. speed
Stitch length
Stl. corr. fac.
Total length
Thread tension
minimum
maximum
Stitches
Thread tens.
Seam section switch via notch detection, stitch counting or manual operation (pedal set
Thread.Tens.Teach-In
LabelScript
Operating Instructions 550-D800 - 01.0 - 05/2023
Function
Indicates if the seam section is free or documented (SAB)
 p. 100
Maximum speed in the current seam section  p. 101
Stitch length in the current seam section  p. 101
Stitch length correction depending on the material
Space between two notches on the sewing material
Tolerance range of the thread tension (define minimum and
maximum values) and the number of tolerance stitches that are
permitted in case of deviations before an error message will be
displayed  p. 102
Current feed value in % (for ETT only)  p. 102
to position -2)  p. 104
Selection of a teach-in file (for ETT only)
 p. 107
Selection of a label script file  p. 107
97