Storage Locations And Automatic Backups (Path+Netw.); Changing The Storage Location - Dürkopp Adler 550-D800 Operating Instructions Manual

Programming
4. Press the YES button.
 The display switches to:
Fig. 166: Deleting a bobbin (4)
Important
If the remaining thread monitor has detected that the bobbin is almost
empty, remove the remaining thread from the bobbin before winding on
a new thread.
5. Confirm with OK.

5.15 Storage locations and automatic backups (Path+netw.)

5.15.1 Changing the storage location

The following storage locations can be changed:
Path
Path for the protocol
database
Path for the system
databases
Path for the automatic copy
of the protocol database
To change a storage location:
1. Log in with security level 2.
2. Open the Setup display ( p. 132).
3. Press the Path+netw. button.
 The display switches to:
Operating Instructions 550-D800 - 01.0 - 05/2023
Function
Storage location of
the entire protocol database  p. 128
the individual protocol files  p. 120
Storage location of the system backups
 p. 125
Storage location for copies of
the entire protocol database  p. 128
the individual protocol files  p. 120
175