Adding An Additional Barcode - Dürkopp Adler 550-D800 Operating Instructions Manual

Programming
Important
You must define 1 barcode on the end label as the end label barcode.
Otherwise, an error message will be displayed.
12. If you wish to print the information contained in the barcode as plain
Information
If plain text has been set in this label script file but the text fails to print,
check the settings in the end label printer driver.
The settings in the end label printer driver may overwrite the settings of the
individual label script files.
Some changes to settings in the end label printer driver may require a
restart.

5.21.8 Adding an additional barcode

You can add any number of barcodes on the end label ( p. 197).
Important
You must define 1 barcode on the end label as the end label barcode.
An error message will be displayed if
• no barcode has been defined as the end label barcode.
• more than 1 barcode has been defined as the end label barcode.
Operating Instructions 550-D800 - 01.0 - 05/2023
text on the end label, set a checkmark at Print Human Readable Code.
199