Thread Tension (Thread Tens.) - Dürkopp Adler 550-D800 Operating Instructions Manual

Programming

5.6.20 Thread tension (Thread tens.)

Here, you can set the thread tension in consideration of the specified
tolerance limits, the sewing speed, the stroke, and the stitch length.
The thread tension can also be checked after a teach-in process with
the help of electronically regulated thread tension (for ETT only).
Opening the display Checking thread tension monitor
To open the display Checking thread tension monitor:
1. Log in with security level 2 ( p. 75).
2. Open the Checks display ( p. 125).
3. Press the Thread tens. button.
 The display switches to:
Fig. 141: Opening the display Checking thread tension monitor
4. Enter the values on the Checking thread tension monitor
display.
Information
The offset value must be set such that the values of the thread tension
range in the middle between the red and the green line.
Loading a Teach-In for Thread Tension file
Manual thread tension requires that you enter the minimum and maximum
values and the stitch length manually:
To load a Teach-In for Thread Tension file:
1. Log in with security level 2 ( p. 75).
148 Operating Instructions 550-D800 - 01.0 - 05/2023