Table of Contents
Advertisement
5.13.11 Defining extended label printing
The information listed in the table below can be included as additional
information on the end label. The desired information can be placed on
the end label by defining a line in the program.
Information
If extended label printing is active, the
information will be printed at the defined position irrespective of the loaded
barcode profile.
To extend the information to be printed on the label:
1. Log in with security level 2 ( p. 75).
2. Open the Setup display ( p. 132).
3. Press the Label button.
4. Press the Define extended label printing button.
The display switches to:
Fig. 162: Defining extended label printing
5. Select the desired acronyms.
6. Press Save to confirm.
Code
Code
MB1-MB9
MMB
172
Information
Multi barcodes 1-9
Section of the multi barcode cut out with the end label multi barcode
mask
Operating Instructions 550-D800 - 01.0 - 05/2023
Programming
Advertisement
Table of Contents
