Table of Contents
Advertisement
To continue the seam:
1. Press the pedal (5) forward (4).
The machine continues to sew.
At seam end
To finish the seam:
1. Press the pedal (5) to position -2 (1) and keep it there.
The thread is cut.
2. Remove the sewing material.
4.14.2 Sewing in the end label
Since it is a production step essential to safety, the sewing of the tearing
seams is documented. All production data pertaining to every tearing
seam is recorded, saved and must be stored permanently.
In addition, every tearing seam is assigned an end label that includes a
barcode. This barcode makes it possible to retrieve the production data
from the database at any time.
The end label is printed on tear-resistant and flame-resistant material by
the end label printer and sewn into a free seam section at the end of the
sewing process. This ensures for the long term that the end label will not
be lost and can always be clearly attributed at any time.
If you, for instance, wish to sew the end label into the 3
check the end label barcode, the function End label in the seam record
set must be activated for the 3
The end label printer will then automatically print the end label at the end
of the documented seam section. A scan of the end label barcode is used
to check if the correct end label is sewn in.
58
The machine stops.
Needle and sewing foot are lifted and remain up as long as the
pedal (5) is kept in the -2 position (1).
WARNING
Risk of injury from damaged tearing seams!
Possible damage to the tearing seam if the end
label is sewn into the seam. In the event of an
accident, the airbag may consequently fail to
deploy, keeping it from protecting against serious
injury.
See the end label ONLY into a free seam section.
rd
seam section.
Operating Instructions 550-D800 - 01.0 - 05/2023
Operation
rd
seam section and
Advertisement
Table of Contents
