Creating Standard Text - Dürkopp Adler 550-D800 Operating Instructions Manual

5.21.9 Creating standard text

You can create standard text on the end label which will be repeated on
all end labels (Static Text).
To create standard text:
1. Click the New Static Text button in the Toolbox.
2. Click the desired position on the end label at which you wish to insert
 The display Static Text appears:
Fig. 197: Creating standard text
3. Enter the desired text into the Text input field.
Information
If you wish to place an additional character such as an * at the beginning
and the end of the text information, enter the asterisk as static text.
4. Adjust the desired default settings ( p. 192).
5. Press OK to save.
200
the standard text.
The marking always refers to the corner at the top left.
Operating Instructions 550-D800 - 01.0 - 05/2023
Programming