Opening The Seam Database (Show Db); Opening The Bobbin Database (Bobbins) - Dürkopp Adler 550-D800 Operating Instructions Manual

Programming
If the function Protocol printer is not active on the Setup display,
the DB print button will be displayed semi-transparent. In that case, it will
not be possible to print the protocol database even if the protocol printer
is connected and set up.

5.6.14 Opening the seam database (Show DB)

The seam database contains the information about all seam record sets
and their settings.
To open the seam database:
1. Log in with security level 2 ( p. 75).
2. Open the Checks display ( p. 125).
3. Press the Show DB button.
 The display switches to:
Fig. 133: Opening the seam database (Show DB)

5.6.15 Opening the bobbin database (Bobbins)

The bobbin database contains the information about all bobbins that are
registered and can be used with the machine.
Information
The bobbins can be deleted here and on the main screen ( p. 174).
Operating Instructions 550-D800 - 01.0 - 05/2023 141