Table of Contents
Advertisement
4. Enter User name, Personnel number and Password into the input
5. To define the desired security level for the new user, press the 0, 1
The check mark on the button indicates which security level has been
6. To store a user image, press the User photo button.
Information
The user photo can also be stored at a later time ( p. 83).
7. Press the Print BC button.
The barcode required to log in the new user is printed out.
8. Log in the new user using the hand scanner ( p. 76).
Once the access barcode has been scanned, an Identity
9. Confirm with OK.
The information for the new user is saved.
10. Press the Save button.
The new user has been created using access barcode detection.
Creating a new user using fingerprint detection
Information
To allow a new user to be created with the help of fingerprint detection,
the fingerprint scanner must have already been set up. This means that
the fingerprint scanner MUST be connected and activated in the software.
To create a new user using fingerprint detection:
1. Log in with security level 2.
2. Open the register screen ( p. 73).
3. Press the New button.
The display switches to:
86
fields of the same name.
or 2 button.
selected (in this case, 0).
number will appear in the input field of the same name.
Operating Instructions 550-D800 - 01.0 - 05/2023
Programming
Advertisement
Table of Contents
