Information
If the fingerprint is not detected at all or only in part, the following error
message will be displayed:
Fig. 87: Creating a new user (8)
This error message is of no consequence. You can scan your fingerprint as
many times as necessary until it has been detected successfully 3 times.
The process does not have to be canceled.
12. Confirm with OK.
13. Place your finger tip on the fingerprint sensor (2) for approximately
The display switches again to one of the two displays.
14. Confirm with OK.
15. Place your finger tip on the fingerprint sensor (2) for approximately
After 3 successful scans, the display will switch to:
Fig. 88: Creating a new user (9)
16. Confirm with OK.
An Identity number will appear automatically in the input field of
90
3 seconds.
3 seconds.
the same name.
Operating Instructions 550-D800 - 01.0 - 05/2023
Programming