Menu Item Machine Config; Start Tack; End Tack; Thread Trim - Dürkopp Adler 650-10 Service Instructions Manual

4.4 Menu item Machine config.

The menu item Machine config. allows you to determine the basic
settings for the machine which apply to all programs.
Fig. 48: Menu item Machine config.

4.4.1 Start Tack

In the submenu Start Tack, you can define how the start bartack is
sewn.
Fig. 49: Start Tack
Parameters in the submenu Start Tack

4.4.2 End Tack

The submenu End Tack matches the submenu Start Tack
( p. 62). You can adjust the same settings here for the end bartack.

4.4.3 Thread Trim

In the submenu Thread Trim, you can define the settings for cutting the
thread.
62
n n
Icon Entry Meaning
Repetitions Number of repetitions per
bartack
t Change Waiting time when switching
between forward and back-
ward stitch
Stitches 
Number of forward stitches
per bartack
Stitches 
Number of backward
stitches per bartack
Speed Speed when sewing the
bartack
Service settings via software (OP3000)
2
0
3
3
Possible value
range
1 – 10
0 – 1000
1 – 50
1 – 50
50 – 2000
Service Instructions 650-10 - 01.0 - 08/2016
Preset value
2
0
3
3
1000