Table of Contents
Advertisement
Operation
Fig. 43: Sewing (1)
3.
The system checks if the sewing material (2 or 3 pieces) matches the
Information
If, under Setup, the function Multiple barcodes or Multiple barcodes
with batch mode is activated, the display switches to the following after
the scanning of the barcodes parts primary:
Fig. 44: Sewing (2)
4. Scan 2 multiple barcodes.
5. Sew seam sections.
The display switches to:
Operating Instructions 550-D800 - 01.0 - 05/2023
Scan the barcodes parts primary of the sewing material.
selected seam record set. If this is not the case, an error message
will appear.
You can predefine up to 9 multiple barcodes. In this seam record set,
2 multiple barcodes will be requested at the beginning.
55
Advertisement
Table of Contents
