The user's access rights vary with their security level. As the machine
produces tearing seams that are essential to safety, each user must log in
before they can before the work designated for their access rights.
Adjusting security levels (0-2)
The security levels can be adjusted for certain activities at the machine.
Adjustments to the access rights can only be made by users with security
level 2.
The following security levels have been set up at the factory:
Activity
Seam program
Check
Protocol database
Cancel a free seam
Continue free seam
Cancel within a tearing seam
Continue tearing seam
To adjust the security levels:
1. Log in with security level 2 ( p. 75).
2. Open the Setup display ( p. 132).
The display switches to:
66
Security level
Operating Instructions 550-D800 - 01.0 - 05/2023
Programming
1
2
1
0
1
0
1