Table of Contents
Advertisement
Programming
5.1.2 Start screen - preparing the machine for operation
Fig. 57: Start screen (1)
①
(1) - Start screen
The start screen (1) is displayed immediately after the machine has been
switched on. The displays vary depending on whether the machine is
equipped with the various scanners or not.
The user can choose between 2 options on the register screen:
• Log in
• Shut down the PC and the machine
Preparing the machine for operation WITHOUT the scanners
Fig. 58: Start screen (2)
To use the displays on the start screen if the machine is neither equipped
with barcode scanners for the needle and hook thread nor with a bobbin
barcode scanner:
1. Use the hand scanner to scan the needle thread barcode below
the needle thread cone.
68
Operating Instructions 550-D800 - 01.0 - 05/2023
Advertisement
Table of Contents
