Dürkopp Adler 550-D800 Operating Instructions Manual page 112

Switching the thread cutter on/off
If the thread cutter is switched on in a seam section, the thread is cut at
the end of the current seam section. The machine starts sewing the next
seam section with a new seam.
The thread cutter can be switched on or off for each free seam section.
If the cutter is switched on, the machine begins sewing the next seam sec-
tion with a new seam.
To switch the thread cutter on or off:
1. Open the Seam record set display ( p. 99).
2. Select the seam section for which the thread cutter is supposed to be
3. Switch Thr. cutter on/off on or off.
 If the checkmark is set, the thread cutter is switched on.
 If the checkmark is not set, the thread cutter is switched off.
Defining the warning stitch count
A warning stitch count can be defined for the last seam section into which
the end label is supposed to be sewn. If the end label barcode was not
scanned and the end label was not sewn in before the number of stitches
warning is reached, the machine will stop and display a warning.
This function is intended to ensure that the last free seam section will not
be completed without sewing in the end label. It is, therefore, advisable to
define the warning stitch count in such a way that there will be enough
space for the end label to be sewn in after the warning was displayed.
Switching foot lift for the documented seam section on/off
If the foot lift function is switched on for a documented seam section, the
sewing feet can be lifted at a sewing stop. If the foot lift function is switched
off, lifting the sewing feet manually in a documented seam section will not
be possible
To switch the function Foot lift on/off:
1. Open the Seam record set display ( p. 99).
2. Select or deselect Foot lift on/off.
 If the checkmark is set, the sewing foot will be lifted at a sewing stop.
 If the checkmark is not set, the sewing foot will not be lifted at a sew-
110
switched on or off.
ing stop.
Operating Instructions 550-D800 - 01.0 - 05/2023
Programming