Setting The End Bartack - Dürkopp Adler 1767 Operating Instructions Manual

Programming
Operating Instructions 1767 - 00.0 - 12/2016
5.2.4

Setting the end bartack

The end bartack secures the seam at the seam end. If a seam
consists of backward stitches only, one speaks of single bartacks.
A seam of forward and backward stitches is called a double
bartack.
Single bartack
To set the single bartack:
1. Press.
 The upper left LED illuminates.
Press the C+ button from the Programming button group
2.
repeatedly until the required number of forward stitches is
reached.
You can begin sewing; press the pedal forward to pedal position +1.
At the end of the seam, press the pedal back to pedal position -2.
Double bartack
To set the double bartack:
1. Press twice.
 Both LEDs illuminate.
Press the C+ button from the Programming button group
2.
repeatedly until the required number of forward stitches is
reached.
Press the D+ button repeatedly until the required number of
3.
backward stitches is reached.
You can begin sewing; press the pedal forward to pedal position +1.
At the end of the seam, press the pedal back to pedal position -2.
To deactivate the end bartack press .
59