Positioning The End Label Barcode; Defining The Font Size - Dürkopp Adler 550-D800 Operating Instructions Manual

Programming
Information
To view the end label, press the Test button.
The end label is printed out once.

5.13.5 Positioning the end label barcode

The position of the barcode on the end label is based on the coordinate
axes X (width) and Y (height). The information is specified in mm.
To position the barcode on the end label:
1. Log in with security level 2 ( p. 75).
2. Open the End label display ( p. 164).
3. Press the Pos.BC X input field.
 An input window opens.
4. Enter the desired value.
5. Confirm with
6. Press the Pos.BC Y input field.
 An input window opens.
7. Enter the desired value.
8. Confirm with

5.13.6 Defining the font size

You can define the font size to be used on the end label:
• Text 1
• Text 2
• Text left/right
To define the font size for each text:
1. Log in with security level 2 ( p. 75).
2. Open the End label display ( p. 164).
3. Press the Txt1 font, Txt2 font or L/R font input field.
 An input window opens.
4. Enter the desired value (1-5).
5. Confirm with
Operating Instructions 550-D800 - 01.0 - 05/2023
.
.
.
167