Creating Variable Text - Dürkopp Adler 550-D800 Operating Instructions Manual

Programming

5.21.10 Creating variable text

You can insert text on the end label that will change. This text may
comprise, for instance, the name of the user or the current production
number of the corresponding day.
To create variable text on the end label:
1. Press the New Variable Text button in the Toolbox.
2. Click the desired position on the end label at which you wish to insert
 The display Variable Text appears:
Fig. 198: Creating variable text
3. If necessary, adjust the Name under which the variable text on the end
4. Select the desired option from the drop-down menu in the Information
5. Adjust the desired default settings ( p. 192).
6. Press OK to save.
Operating Instructions 550-D800 - 01.0 - 05/2023
the variable text.
The marking always refers to the corner at the top left.
label will be displayed on the program interface.
input field.
This is the information that will be printed on the end label as variable
text.
201