Dürkopp Adler 550-D800 Operating Instructions Manual page 102

Programming
Fig. 102: Opening the Seam record set display (3)
Here, you can edit all settings of a seam record set.
Selecting a seam section
You can save different settings for each individual seam section.
The selected seam section will always be arranged slightly higher than
the other sections. In the example below, the first seam section has been
selected. The short black bar at the beginning of the seam section indi-
cates that this seam section begins with a start bartack ( p. 108).
To select a seam section:
1. Open the Seam record set display ( p. 99).
Fig. 103: Selecting a seam section
2. Press the corresponding colored bar to select the desired seam section.
Defining a free seam section
To define a free seam section:
1. Open the Seam record set display ( p. 99).
2. Select the documented seam section you wish to convert into a free
seam section ( p. 100).
100 Operating Instructions 550-D800 - 01.0 - 05/2023