Table of Contents
Advertisement
Fig. 173: Creating a teach-in file (1)
5. Enter the desired values:
6. Enter the desired target value of the documented seam section.
The upper and lower limit will be entered automatically as soon as
7. Enter the desired values:
8. Press the T.Tens.Target Point button.
The value of the needle thread tension is adopted, and the stepper
182
• Sewing foot pressure
• lower limit of the thread tension
• upper limit of the thread tension
• Stitch length in mm/10
• Stroke
• maximum speed (max. speed rpm)
Use the manufacturer's specifications as a reference.
the target value has been defined.
• maximum speed (max. speed rpm)
• Stitch length in mm/10
• Stroke
• Sewing foot pressure
motor moves to the corresponding position.
Operating Instructions 550-D800 - 01.0 - 05/2023
Programming
Advertisement
Table of Contents
