Table of Contents
Advertisement
Deactivating a function
To activate/deactivate a function key:
1. Press the desired button again.
Function is deactivated. The button turns off.
Functions of the buttons
Button
42
Function
Sewing backwards
When this button is activated, the machine sews in reverse.
Needle position
When this button is activated, the needle moves to a specific position.
This position is determined individually via the parameter settings.
For more information, read the Service Instructions.
The machine comes configured so that selecting the button will bring
the needle up to the top dead center.
This button will be locked in a documented seam section.
Bartack suppression
This button cancels the general setting for sewing start and end bartacks.
If bartacks are on, pressing the button skips the next bartack. If bartacks
are off, pressing the button sews the next bartack.
Cancel tearing seam
Forced canceling of the tearing seam.
Stroke quick adjustment
o
Fully customizable
The button is fully customizable.
The machine comes configured so that a press of the button will switch
on the underarm lighting.
Operating Instructions 550-D800 - 01.0 - 05/2023
Operation
Advertisement
Table of Contents
