Table of Contents
Advertisement
Operation
4.11 Quick stroke adjustment
The sewing foot stroke can be activated using the button on the machine
arm or the knee button.
On machines equipped with a knee button, the knee button can be used
to switch on the increased sewing foot stroke. You can assign functions to
the knee button in the software using the control panel of the machine.
Fig. 37: Quick stroke adjustment
①
②
(1) - Knee button
(2) - Button
To switch on maximum sewing foot stroke in a free/non-documented
seam section:
1. Press the knee button (1).
The sewing foot stroke remains active for as long as you hold down
the knee button (hold-to-run mode) / until the next time you press the knee
button (push-to-run mode).
OR
1. Press the button (2).
48
Operating Instructions 550-D800 - 01.0 - 05/2023
Advertisement
Table of Contents
