Table of Contents
Advertisement
Programming
5.21 Additional program Label Creator
You can use the software of the machine ( p. 163) or the additional
program Label Creator to create the end label. Label Creator has
been installed on the control panel and can be opened on the Windows
user interface.
Label Creator offers the following main setting options:
• Defining the format and size of the end label
• Creating a 1D/2D barcode as an end label
• Inserting additional 1D/2D barcodes
• Inserting plain text under the end label barcode (Human Readable Code)
• Adding a check digit at the end of the barcode (Check Digit)
• Encoding the barcode information
• Defining the barcode type
• Defining the width and spacing of the black bars of the 1D barcode
• Defining main text:
• Defining additional text:
• Adding graphic (e.g. logos)
The system will create a so-called label script file after an end label has
been saved. This label script file can be linked to any seam record set
( p. 107).
Important
To allow for clear identification of the end label barcode content and for re-
trieval of the protocol file associated with the sewing material many years
later, each end label MUST be unique. Each end label is unique if the end
label barcode contains, for instance, such information as the day's current
date, the current production number and the machine designation.
Information
The following description refers to the factory settings. This description
cannot include any individual changes such as modified storage location.
Label script files may only be created and linked to seam record sets by
qualified specialists with security level 2.
Operating Instructions 550-D800 - 01.0 - 05/2023
• Table of Contents
• Position
• Size
• Table of Contents
• Position
• Size
189
Advertisement
Table of Contents
