Dürkopp Adler 550-D800 Operating Instructions Manual page 140

Programming
To activate or deactivate the components:
1. Log in with security level 2 ( p. 75).
2. Open the Setup display ( p. 132).
3. Press the component you wish to activate/deactivate.
 If the checkmark is set, the function is activated.
 If the checkmark is not set, the function is deactivated.
Values
Fig. 131: Values
Press the arrows on the right next to the buttons to open a selection menu.
138 Operating Instructions 550-D800 - 01.0 - 05/2023