Dürkopp Adler 550-D800 Operating Instructions Manual page 100

Input field
PictureFile
Stroke
Stroke knee
Released thread
Needle thread ID
Bobbin thread ID
Text on printed label
Start bartack
Tack stitches
End bartack
Tack STL
Sew label on
Thr. cutter on/off
Foot lift on/off
DACflex
The factory setting defines the basic settings for all seam sections.
The settings can be changed individually for each seam section.
The bars of the documented seam sections are set apart from the non-
documented seam sections by a different color ( p. 100).
The tallest bar in the row represents the present seam section in which
settings are currently being edited.
98
Function
Selection of an image file shown at the beginning if this seam
record set is supposed to be sewn.  p. 108
The image can, for instance, show the pieces to be sewn or a
different, specific work instruction.
The image MUST be confirmed with OK at the beginning.
Otherwise, it will not be possible to sew the seam record set.
Stroke of the alternating sewing feet  p. 103
Stroke upon activation of the knee button (quick stroke
adjustment)  p. 104
The needle / bobbin thread ID is used to define which thread is
permitted for the seam record set
 p. 178
Define the text that will be printed on the end label. This option
is only available in documented seam sections.  p. 163
Select if a single or double start bartack or no start bartack will
be created for the current seam section  p. 108 et sqq
Number of tack stitches (forward/backward)  p. 108
Select if a single or double end bartack or no end bartack will
be created for the current seam section  p. 108 et sqq
Stitch length of the start and end bartack  p. 109
If activated, this function will activate the barcode scanner of
the end label in this seam section. The end label barcode is
supposed to be scanned, and the label is supposed to be sewn
in at this seam section.  p. 109
The thread cutter cuts the thread at the end of the current seam
section  p. 110
Manual sewing foot lift at a sewing stop in the seam possible/
not possible  p. 110
Set the parameters of the DACflex  p. 112
Operating Instructions 550-D800 - 01.0 - 05/2023
Programming