Table of Contents
Advertisement
Programming
5.21.12 Saving a label script file
If you created a new end label, you need to save it after you are finished.
When the label is saved, a label script file is generated that can be linked
to the seam record sets of your choice ( p. 107).
Important
Save the new end label before closing the Label Creator. Otherwise,
all data will be lost.
Fig. 201: Saving a label script file (1)
To save a label script file:
1. Click on the File menu item.
2. Select Save as.
The display switches to:
Fig. 202: Saving a label script file (2)
3. Enter the desired file name into the File name input field.
4. Save the information with Save.
Important
You must define 1 barcode on the end label as the end label barcode.
An error message will be displayed if
• no barcode has been defined as the end label barcode.
• more than 1 barcode has been defined as the end label barcode.
Operating Instructions 550-D800 - 01.0 - 05/2023
203
Advertisement
Table of Contents
