Defining The Format Of The End Label - Dürkopp Adler 550-D800 Operating Instructions Manual

5.13.4 Defining the format of the end label

You can specify in which format and with which orientation the end label
will be printed.
Fig. 157: Defining the format of the end label (1)
The end label is always printed out in arrow direction by the end label
printer.
With increasing number, each printout will be rotated 90° clockwise.
If the print on the label matches the printout (see Fig. above), the orientation
is set to 0, i.e. landscape format. However, the end label can also be printed
out in portrait format (orientation 1 or 3). The layout of the end label is always
the same regardless of which format has been set for the printout.
Fig. 158: Defining the format of the end label (2)
To define the format of the end label:
1. Log in with security level 2 ( p. 75).
2. Open the End label display ( p. 164).
3. Press the Label direction input field.
 An input window opens.
4. Enter the desired value:
5. Confirm with
166
1
• Landscape: 0 or 2
• Portrait: 1 or 3
.
2
0
Operating Instructions 550-D800 - 01.0 - 05/2023
Programming
3