Inserting A Graphic - Dürkopp Adler 550-D800 Operating Instructions Manual

5.21.11 Inserting a graphic

To insert a graphic:
1. Click the New Graphic button in the Toolbox.
2. Click the desired position on the end label at which you wish to insert
 The display Graphic appears:
Fig. 199: Inserting a graphic (1)
3. To select a bmp file, click on the Graphic File input field.
 The display switches to:
Fig. 200: Inserting a graphic (2)
4. Select the desired bmp file.
5. Confirm with Open.
6. Adjust the desired default settings ( p. 192).
7. Press OK to save.
202
the graphic.
The marking always refers to the corner at the top left.
Operating Instructions 550-D800 - 01.0 - 05/2023
Programming