Restarting The Program (Reset) - Dürkopp Adler 550-D800 Operating Instructions Manual

30. If all values are correct, press the File name (Prog.Number) input field.
 An input window appears.
31. Enter the name / code of the seam record set to which the teach-in file
32. Confirm with OK.
33. If necessary, add a comment to the teach-in file.
34. To save the teach-in file, press the Save button.

5.18 Restarting the program (Reset)

You can restart the program from the control panel without the need to
switch the entire machine off and back on again.
Fig. 179: Restarting the program (Reset) (1)
To restart the program:
1. Press the Reset button on the main screen.
 The program is closed and restarted automatically.
186
is supposed to be linked.
Once the program has restarted, the user can log back in and continue
working.
Operating Instructions 550-D800 - 01.0 - 05/2023
Programming