FUTABA T16IZ SUPER Full Manual page 97

Sensor：Reload
When using multiple sensors of the same type
the sensors must be registered in the transmitter.
Connect all the sensors to be used to the T16IZ
of each sensor is registered in the transmitter.
Linkage menu
above.
2. Tap "Reload" on page 3/3 of the [Sensor] screen.
3. Tap "Reload".
All the sensors are registered and can be used.
Sensor : Register
This function registers an additional sensor.
The sensor ID is registered in the transmitter.
Linkage menu
above.
2. Tap "Register" on page 3/3 of the <Sensor> screen.
3. The sensor is registered and can be used.
This page is set when using multiple telemetry sensors of the same type.
This page is set when using multiple telemetry sensors of the same type.
97
Hub
Hub
*It is not necessary to carry out
multiple battery connections like
*When the number of slots needed in
displayed and registration cannot be
performed. Disable unused slots or
Hub