FUTABA T16IZ SUPER Full Manual page 123

Telemetry Alarm Duration and Repeat time
The repeat time and duration time for the telemetry alarm (buzzer, vibration and speech) can be set.
menu to call the setup screen shown below.
Duration
It is an alarm output time.
Setting range：1 s 〜 30 s
Initial value：INH
Duration value has to be less than
repeat value.
Duration time is extended when the
other alarm event occurs.
e.g. Repeat time is 8 seconds and Duration time is 5 seconds.
Repeat time 8s
Alarm
ON
output
Duration time 5s
Duration is not displayed when
Repeat is INH.
OFF ON
123
Repeat
It is a repeat time of an alarm
output.
Setting range：INH，1 s 〜 240 s
Initial value：INH
OFF ON OFF