FUTABA T16IZ SUPER Full Manual page 157

Ailevator
This function improves the operating performance
of the roll axis by operating the elevators as
ailerons.
both ailevator and ailerons are coupled together to
Note: Select ailevator as the Model type at the
Model type screen. This changes the output
channel. Check the Function menu.
menu and call the setup screen
shown below.
Condition group/
single mode
selection (Gr. /Sngl)
(Elevator function)
The up and down rates of the left and
right elevators when the elevator stick is
manipulated can be individually adjusted.
Tap to the item you want to adjust.
buttons.
of travel. Decrease the travel until no binding occurs.
[Corresponding model type]: Airplane/glider, Tail type
Ailevator
157
ELEVATOR
(AILERON 5)
(Aileron function)
When the elevators are used as
ailerons, aileron travel of the left and
right elevators can be adjusted.
ELEVATOR 2
(AILERON 6)