System Type - FUTABA T16IZ SUPER Full Manual

System type
System Type selection
The T16IZ SUPER is for 2.4 GHz only. The system
can be changed from among 6 choices: FASSTest
next page.
check servo direction and motion.
Linkage
menu
Receiver linking
is linked to. When using a receiver other than one
system type change.
Cases when linking is necessary:
・When using a receiver other than the initial setting.
・When the communication system was changed.
(FASSTest18CH ↔ FASSTest12CH etc. )
・When a new model was created by model
selection.
System mode setting, Receiver link
*FASST MULTI/FASST 7CH cannot be selected for Europe.
and access the setup screen shown below.
P.43
81
Dual receiver function (only FASSTest 18CH )
channels. Separate fail-safe voltage can be set to
each receiver.
receiver.
Telemetry function (FASSTest /T-FHSS mode only)
DL Interval (FASSTest mode only)
changed.
Battery fail-safe voltage setup (FASSTest /T-FHSS
mode only)