FUTABA T16IZ SUPER Full Manual page 230

VR selection
[Setting method]
1. Control selection
Tap the [Control] "--" button to call the
<Hardware select> screen, and then select
the switch and its ON direction.
2. Mode selection
Tap the [Mode] button, and then select the
mode ([LIN.], [ATL+], [ATL-], or [SYM.]).
3. Rate adjustment
Tap the [Rate] "value" button.
Set the rate using the " ▼ ▼ " " ▼ " " ▲ "
After setting, press a HOME/EXIT button
Rate adjustment
230
Operation mode selection
*The operation modes which can be
selected depend on the function.
(Fine tuning VR operation position)
[Fine tuning VR operation mode]
When the VR is turned clockwise and
counterclockwise, the mixing rate
increases and decreases, respectively.
When the VR is turned, the mixing rate
increases.
When the VR is turned, the mixing rate
increases.
[SYM.] When the VR is turned to the left or
right of the neutral position, the mixing
rate increases.
LIN. ATL+ ATL- SYM.