Function Name - FUTABA T16IZ SUPER Full Manual

Function name
menu to call the setup screen shown below.
1. Select [Function name] from the Linkage
menu and tap the screen.
2. The Function name setup screen is displayed.
3. When the function whose name is to be
changed is selected and the screen is
4. Select the function to be renamed and
select [Rename] and tap the screen. A
character input screen is displayed. Input the

function name.

5. When [Reset] is selected and the screen is
held down, the function name is set to the
initial state function name.
Function name can be changed
6. The function name may be displayed in 10
characters or 4 characters, depending on
the setup screen. For 4-character display,
input the function name as required.
92