Telemetry : Gps [Speed] - FUTABA T16IZ SUPER Full Manual

Telemetry : GPS [Speed]
The speed screen displays and sets the speed data from an
The speed of the aircraft during flight can be displayed.
increases.
the setup screen shown below.
Linkage menu
Max. and min. values
s i n c e t h e p o w e r
was turned ON will
display.
↑ An upward arrow
indicates the alarm
will sound when the
speed reaches above
your set value.
↓ A downward arrow
indicates the alarm
will sound when the
speed reaches below
your set value.
Alarm is chosen from
Buzzer, Voice, and
Inhibit.
Allows Speech to be
turned ON or OFF.
1. Tap Alarm and choose from Buzzer, Voice, and
Inhibit.
2. Choose "Inhibit" for Vibrator if not using the vibrator
alarm. If using vibrator, choose one of the three
types.
3. Tap Limit [xxx km/h].
buttons.
Adjustment range 0km/h~500km/h
≧
to the initial value.
5. To terminate the input and return to the original
state, push the HOME/EXIT button.
*A GPS sensor must be installed in the aircraft.
Reference and Distance mode work in conjunction with Distance
discussed on the previous two pages.
112
Displaying data from the speed
instruction manual.
*It cannot be used in FASST mode and S-FHSS mode.
FASSTest12CH mode.
functions.
"Vibrator" type
If the following types are selected, the transmitter
will vibrate during the warning.
Type 1
Type 2
Type 3
*Speed alarm precaution
Speed
Sets the speed on
which the alarm
operates.