FUTABA T16IZ SUPER Full Manual page 140

AIL → Brake flap
in the aileron mode. When the aileron stick
perform the aileron operation simultaneously
and the operation characteristic of the roll axis is
improved.
setting a switch. (Always ON at [--] setting)
menu and call the setup screen shown
below.
● Mixing curve setting
(For a description of the
setting method, see the
description at the back
of this manual.)
Activate the function by
tapping the [INH].
Condition group/single
mode selection (Gr. /Sngl)
The ON/OFF switch of
mixing is chosen.
To set linking, tap to
the [OFF] item
(ON is displayed.)
of the switch and tap the screen to call the
selection screen, and then select the switch
and set its ON direction. (Always ON at "--"
setting)
(For a description of the switch selection
method, see the at the back of this manual.)
Adjust the mixing rate.
[Corresponding model type]: Airplane/
AIL
AIL
140
FLP 3
(Brake Flap)
AIL1
(Main Aileron)
AIL 3
(Chip Aileron)
Currently selected condition name
(For a description of the curve setting
method, see the description at the back of
this manual.)
Set it to ON and tap the screen.
FLP 4
(Brake Flap)
AIL 2
(Main Aileron)
AIL 4
(Chip Aileron)
Left/right overall
adjustment at Rate A
and Rate B
Adjustment of each
flap servo