S.bus Servo - FUTABA T16IZ SUPER Full Manual

S.Bus servo
various settings you input. Servo setting can be
[S.BUS Servo] button in the System menu.
1. Select [S.Bus servo] of the System menu.
3. Press [Read]. The ID and current setting of
that servo are displayed.
servo in the group can be set by entering the ID of
S.BUS servo setting
4. When multiple servos are connected change
[INH] at the right side of the ID number on the
screen to [ACT] and enter the ID of the servo
you want to set.
5. Set each item. (Please see the next page.)
6. Press [Write]. The settings are changed.
62
S.BUS/S.BUS2
Servo
3-way hub
or Y-harnesses
S.BUS/S.BUS2
Servo