Acceleration
the throttle rise characteristic at acceleration/
deceleration operation. An acceleration function
operations at throttle stick acceleration/deceleration
operation can be set.
Example of acceleration function use
function is effective when you want to
quicken the response of the fuselage at 3D
When used, high pitch temporarily exceeds
maximum pitch, but immediately returns to
maximum pitch.
menu and call the setup screen shown
below.
W h e n u s i n g t h i s
function, Tap [INH].
(ON is displayed.)
The rate the angle
increases.
a t a c c e l e r a t i o n ( h i g h ) a n d s e t t i n g a t
deceleration (low).
(The operation point is displayed on a
graph.)
can be set.
Condition group/
single mode selection
(Gr. /Sngl)
The return time after operation (Damping)
can be set.
(First return)1 〜 100(Slow return)
(Acceleration doesn't function as 0.)
To next page
1/2 : Pitch
2/2 : Throttle
and deceleration can be set. When an
operation point is exceeded, acceleration is
performed.
Note: When using the acceleration function,
since the pitch stroke is large, make your
settings so there is no binding of your linkage.
183
Operation up to this
range will initiate
acceleration.
Act position
Current position
Need help?
Do you have a question about the T16IZ SUPER and is the answer not in the manual?
Questions and answers