FUTABA T16IZ SUPER Full Manual page 46

It is extremely important to range check your models prior to each flying session. This enables you to ensure
check.
1. While pushing "U.MENU/MON." button.
2. THR Stick Slow.
4. Select "Range check" at the System menu.
5. "Start" tap.
6. The HOME/EXIT button is pressed
to end a range check.
3. T16IZ SUPER Power ON.
the screen one time.
1. With the "Range check mode" on, walk away from
the model while simultaneously operating the
controls. Have an assistant stand by the model
to confirm that all controls are completely and
correctly operational. You should be able to
walk approximately 30-50 paces from the model
without losing control.
2. If everything operates correctly, return to the
model. Set the transmitter in a safe, yet accessible,
location so it will be within reach after starting the
engine or motor. Be certain the throttle stick is in
the low throttle position, then start the engine or
motor. Perform another range check with your
assistant holding the aircraft with the engine
running at various speeds. If the servos jitter or
move inadvertently, there may be a problem.
for loose servo connections or binding pushrods.
Also, be certain that the battery has been fully
charged.
About 100 feet
Range check mode
WARNING
Do not fly in the range check mode.
46
Range checking on
low power.