Telemetry : Temperature - FUTABA T16IZ SUPER Full Manual

Telemetry : Temperature
the temperature information from an optional
temperature sensor.
screen to call the setup screen shown below.
Linkage menu
Max. and min. values
s i n c e t h e p o w e r
was turned ON will
display.
↑ An upward arrow
w i l l s h o w t h a t a n
alarm will sound when
the temperature rises
above the set value.
↓ A downward arrow
w i l l s h o w t h a t a n
alarm will sound when
the temperature drops
below the set value.
Alarm is chosen from
Buzzer, Voice, and
Inhibit.
Allows Speech to be
turned ON or OFF.
1. Tap Alarm and choose from Buzzer, Voice,
and Inhibit.
2. Choose "Inhibit" for Vibrator if not using the
vibrator alarm. If using vibrator, choose one
of the three types.
3. Tap to the Limit [℃ ] item.
buttons.
℃
Adjustment range: -20℃ ~200℃
≧
to the initial value.
5. To terminate the input and return to the
original state, push the HOME/EXIT button.
*A temperature sensor must be installed in the aircraft.
℃
Displaying data from the temperature
*It cannot be used in FASST mode and S-FHSS mode.
FASSTest12CH mode.
functions.
"Vibrator" type
If the following types are selected, the transmitter
will vibrate during the warning.
Type 1
Type 2
Type 3
102
Temperature
Sets the temperature
on which the alarm
operates.