FUTABA T16IZ SUPER Full Manual page 117

Telemetry : Airspeed sensor [Airspeed]
The speed screen displays and sets the speed
separately.
The speed of the aircraft during flight can be
more accurate aircraft speed.
screen to call the setup screen shown below.
Linkage menu
Max. and min. values
s i n c e t h e p o w e r
was turned ON will
display.
↑ An upward arrow
indicates the alarm
will sound when the
speed reaches above
your set value.
↓ A downward arrow
indicates the alarm
will sound when the
speed reaches below
your set value.
Alarm is chosen from
Buzzer, Voice, and
Inhibit.
Allows Speech to be
turned ON or OFF.
1. Tap Alarm and choose from Buzzer, Voice, and
Inhibit.
2. Choose "Inhibit" for Vibrator if not using the vibrator
alarm. If using vibrator, choose one of the three
types.
3. Tap Limit [xxx km/h].
buttons.
Adjustment range 0km/h~800km/h
≧
to the initial value.
5. To terminate the input and return to the original
state, push the HOME/EXIT button.
Displaying data from the airspeed
*A Airspeed sensor must be installed in the aircraft.
instruction manual.
*It cannot be used in FASST mode and S-FHSS mode.
FASSTest12CH mode.
functions.
If the following types are selected, the transmitter
will vibrate during the warning.
Type 1
Type 2
Type 3
117
Speed
Sets the speed on
which the alarm
operates.