FUTABA T16IZ SUPER Full Manual page 126

3. Select the operating mode for each channel.
"NORM": The model is controlled by signals
from the student transmitter.
"MIX" mode: The model is controlled by
s i g n a l s f r o m t h e t e a c h e r a n d s t u d e n t
transmitters. (Reset the student's model data
to the default condition.)
"FUNC" mode (function mode):
The model is controlled by signals from
the student transmitter with the teacher
AFR setting. (Reset the student's model data
to the default condition.)
"OFF": Only the teacher side operates.
the channel.
Setting range: -100~100
Initial value: 100
4. Set the switch of each channel.
"--" : Always ON.
"SA"~"SH": The switch which enables student
side operation can be selected. (See "Switch
selection method" at the end of this manual
for selection method details.)
in the trainer student mode.
Futaba is not responsible for damage
sustained by combination with parts other
than Futaba Genuine equipment.
When connecting Futaba transmitters to
the trainer code, do not operate the power
switch on the student side transmitter and
operate the power switch on the teacher
side transmitter as before. The student side
transmitter turns power automatically in
conjunction with the teacher side.
126