FUTABA T16IZ SUPER Full Manual page 171

This section contains information on the commands
that apply to helicopters only. For instructions
sections pertaining to those aircraft.
beforehand.
◆ Condition hold
WARNING
For safety reasons, when performing individual
adjustments it is recommended that you shut off
the engine and disconnect the motor to prevent
rotation.
*Sudden, abrupt rotation can result in death or serious injury.
Servo monitor
Condition select
AFR
Dual rate
Program. mixes
Pitch curve
Throttle curve
Acceleration
Throttle hold
Swash mixing
Throttle mixing
Pitch → Needle
Pitch → Rudder
Gyro
Governor
Gyro setting
Displays the servo test and operation position
Flight conditions addition, deletion, copy, condition renaming, and condition delay can be set.
Sets the angle and curve of all the operation functions.
D/R curve which can be switched with a switch, etc. can also be added.
Program mixing which can be freely customized. Up to 10 mixes can be used for each condition.
Pitch curve and hovering trim adjustment
Throttle curve and hovering trim adjustment
Allows a brief "overload" in response to sudden throttle and pitch commands
Moves the throttle to idle during autorotation
Compensates for each control response
Compensates for power loss when cyclic applied
Adjusts response curve in different flight conditions
Handles torque changes from pitch angle inputs
Used to switch gyro sensitivity
Used to switch RPM of the helicopterʼs head
Detailed setting of CGY755/CGY760R
screen if necessary before setting the model data at
in a separate section.
operation.
● ON/OFF operation on the Home screen
displayed on the screen.
171