FUTABA T16IZ SUPER Full Manual page 147

Rudder → Aileron
size plane.
setting a switch. (Always ON at [--] setting)
and call the setup screen shown below.
● Mixing curve setting
(For a description of the
setting method, see the
description at the back
of this manual.)
Activate the function by
tapping the [INH].
Condition group/single
mode selection (Gr. /Sngl)
The ON/OFF switch of
mixing is chosen.
To set linking, tap to
the [OFF] item
(ON is displayed.)
of the switch and tap the screen to call the
selection screen. Then, select the switch and
set its ON direction. (Always ON at "--" setting)
(For a description of the switch selection
method, see back of this manual.)
"--" item and tap the screen to call the
selection screen and then select the VR. The
adjustment rate can be set.
[Corresponding model type]:
Airplane/glider, general
( )
Currently selected condition name
147
AIL1
(Main Aileron)
AIL 3
(Chip Aileron)
RUDDER 1
Winglet
at Flying wing
V-TAIL
RUDDER 2
RUDDER
The VR operation mode can also be set.
method, see the description at the back of
this manual.)
(For a description of the curve setting
method, see the back of this manual.)
displayed.)
AIL 2
(Main Aileron)
AIL 3
(Chip Aileron)
RUDDER 2
Winglet
( )
at Flying wing
RUDDER
Left/right overall
adjustment at Rate A
and Rate B
Fine tuning
setting