FUTABA T16IZ SUPER Full Manual page 148

Rudder → Elevator
acrobatic planes.
setting a switch. (Always ON at [--] setting)
model menu and call the setup
screen shown below.
● Mixing curve setting
(For a description of the
setting method, see the
description at the back
of this manual.)
Activate the function by
tapping the [INH].
Condition group/single
mode selection (Gr. /Sngl)
The ON/OFF switch of
mixing is chosen.
To set linking, tap to
the [OFF] item
(ON is displayed.)
of the switch and tap the screen to call the
selection screen. Then, select the switch and
set its ON direction. (Always ON at "--" setting)
(For a description of the switch selection
method, see the description at the back of
this manual.)
"--" item and tap the screen to call the
selection screen and then select the VR. The
[Corresponding model type]: Airplane, general
(Fine tuning)
Currently selected condition name
adjustment rate can be set.
The VR operation mode can also be set.
method, see the description at the back of
this manual.)
(For a description of the curve setting
method, see the description at the back of
this manual.)
displayed.)
148
Up/Down overall
adjustment at Rate A
and Rate B
Fine tuning
setting