Engine / Chassis Ground; Spark Plug Service - Polaris RZR 900 2017 Service Manual

Hide thumbs Also See for RZR 900 2017:

Table of Contents

12.0 or less

Follow the charger instructions supplied by the

manufacture regarding the order or connections, when

to switch positions, and when to connect the charger to

ENGINE / CHASSIS GROUND

Inspect the ground cable connections. Remove ground

terminals and clean if necessary.

The chassis ground connection

start solenoid

, can be accessed through the left rear

Inspect the chassis ground terminals. Be sure the

grounds are clean and tight.

Inspect and replace the spark plugs at the intervals

outlined in the Periodic Maintenance Chart.

9930588 R02 - 2017-2020 RZR 900 900/S 900/S4 1000/S 1000/S4 Service Manual

, located below the

1. Remove the cargo box access panel

A hot engine can cause serious burns. Allow engine to

cool or wear protective gloves when removing the spark

2. Remove both spark plug caps

Use MAG and PTO reference decals on spark plug

wires for reassembly.

3. Clean out plug wells with compressed air to remove

any loose dirt or debris.

4. Rinse plug wells with water and dry with compressed

Spark plug wells have drain holes built into the cylinder

head to allow water to drain out.

5. Remove spark plugs using a 5/8" spark plug socket

with an extension.

Table of Contents